Mô tả sản phẩm

High Voltage Ionizing System Particularly Suited for Sensitive Flat Panels

Simco-Ion’s μWire (“Microwire”) AeroBar Model 5710 is a cost-effective, high-performance ionizer specifically designed to eliminate static charge on large surface areas. The μWire AeroBar is particularly suited for sensitive flat panels where fast discharge times and low swing voltages are desired. The μWire AeroBar utilizes MicroPulse technology applied to a corona wire system for optimal performance. MicroPulse technology reduces ion recombination at the corona wire, thus increasing product efficiency and performance.

  • Unique corona wire design (no emitter points)
  • MicroPulse high voltage technology
  • Flexible and powerful setup

       

     

 

 

μWire AeroBar® 5710

Thông số kỹ thuật

Voltage Input: 24 VDC ±10%, 12W (max) Output: Adjustable, 13 kV pk-pk (typ)
Discharge <1.5 sec for ±1000V to ±100V discharge @ 30 cm (12”), 50 mm air jet spacing with min CDA 2 lpm/airjet
Balance Inherently self-balancing system <±25V over the length of the bar; maintain balance setting >6 months without cleaning
Ion Emission MicroPulse (μPulse) Technology
Emitter Tungsten Wire, 80 micron dia.
Cleanroom Class ISO 14644-1 Class 2
Air Supply Air jet spacing at either 50 mm (recommended for target distances up to 600 mm) or 75 mm; 5710 can be ordered with straight air jets or alternately left & right angled air jets
Dimension 3.0”H x 1.3”W x 15.7 / 19.7 / 25.6 / 29.5 / 35.4 / 39.4 / 45.3 / 49.2 / 55.1 / 59.1 / 65 / 68.9 / 74.8 / 78.7 / 84.6 / 88.6 / 94.5 / 98.4 / 104 / 108 / 114 / 118”L (76.2 x 3.3 x 40 / 50 / 65 / 75 / 90 / 100 / 115 / 125 / 140 / 150 / 165 / 175 / 190 / 200 / 215 / 225 / 240 / 250 / 265 / 275 / 290 / 300 cm)

Tải xuống tài liệu

Để lại thông tin kết nối với CNS Technologies

Kết nối với chúng tôi